HPDAVV 21'' Rim 1.5HP Tire Changer and 10''-24'' Rim Tire Balancer Combo and 5HP Air Compressor w/ 60Gal ASME Tank for Tire Repair and Wheel Balancing Garage Shop Equipment w/ 1 Year Full Warranty
Product details
| Management number | 238357167 | Release Date | 2026/07/11 | List Price | US$1,784.00 | Model Number | 238357167 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
<p>Tire Changer: Voltage: 110V/60HZ; Power: 0.75KW/1.5HP; Working Pressure: 8-10Bar; Wheel Clamping system: 4 Clamps-Internal; Rim Clamping Outer: 10''-18''; Rim Clamping Inner: 12-21''; Max.Tyre Diameter: 38''; Max.Tyre Width: 11''<br>Tire Balancer: Voltage: 110V/60HZ; Power: 0.28KW; Balancing Accuracy:±1g; Balancing Speed~200r/min; Positioning Accuracy: 1.5°; Cycle Time: 8s; Rim Diameter Range:10"~24 "(256mm~610mm); Rim Width 1.5"-20"; Back Spacing:<190mm; Noise Level:<70db; Temperature:5~50℃; Height Above Sea Level:≤4000M; Relative Humidity:≤85%<br>Oil-free Air Compressor: Voltage: 220 V/1Ph; Power: 5 HP; Air Flow: 16 CFM; Max psi: 145 psi; Tank: 60 Gal ASME; Stage: 1 Stage<br>Advanced Clamp Positioning of Tire Changer: HPDMC advanced positioning system lets you clamp a wheel at any point in the clamping range. Precisely positioning the clamps can help ensure the wheel is held perfectly still during the tire changing process<br>Automatic Intelligent Operation: The tire balancer has the ability to automatically input the rim size by using a measuring scale. Features intelligent self-calibrating capabilities which can automatically calibrate and adjust various internal settings and measurements and allows the measuring scale to self-calibrate<br>Manual drain for routine draining and rust prevention in the simplifies regular maintenance, 3-Cylinder Cast-Iron design maintain rigid tolerances for high efficiency . Also for the vertical tank saves space, provides easy access<br>Wide Application: They are widely used in tire repair shops, wheel balancing garage shop, individual workshop and etc.</p>
- Tire Changer: Voltage: 110V/60HZ; Power: 0.75KW/1.5HP; Working Pressure: 8-10Bar; Wheel Clamping system: 4 Clamps-Internal; Rim Clamping Outer: 10''-18''; Rim Clamping Inner: 12-21''; Max.Tyre Diameter: 38''; Max.Tyre Width: 11''
- Tire Balancer: Voltage: 110V/60HZ; Power: 0.28KW; Balancing Accuracy:±1g; Balancing Speed~200r/min; Positioning Accuracy: 1.5°; Cycle Time: 8s; Rim Diameter Range:10"~24 "(256mm~610mm); Rim Width 1.5"-20"; Back Spacing:<190mm; Noise Level:<70db; Temperature:5~50℃; Height Above Sea Level:≤4000M; Relative Humidity:≤85%
- Oil-free Air Compressor: Voltage: 220 V/1Ph; Power: 5 HP; Air Flow: 16 CFM; Max psi: 145 psi; Tank: 60 Gal ASME; Stage: 1 Stage
- Advanced Clamp Positioning of Tire Changer: HPDMC advanced positioning system lets you clamp a wheel at any point in the clamping range. Precisely positioning the clamps can help ensure the wheel is held perfectly still during the tire changing process
| Cfm | 16 |
|---|---|
| Volume capacity | 60 gal |
| Horsepower | 5 HP |
| Maximum psi | 145 psi |
| Number of stages | 1-Stage |
| Air compressor pump type | Oil-free |
| Air compressor tank type | Vertical |
| Brand | Hpdavv |
| Volts | 220 V |
| Electrical phase | Single Phase |
| Material | Cast-Iron |
| Color | 810+790+56008 |
| Watts | 0.75 kW |
Bestseller ranking
Air Compressors
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form